ACCESS 2/3 SG -WAY KIT MANUAL User Manual Congratulations on choosing Focal automobile speakers. Focal speakers remain high quality products, due to the multitude of advanced materials used. Detailed research and development in the laboratory, from dedicated engineers and technicians, played a major role in producing such high performing products. To gain the best results from your speakers, please ensure you follow these recommendations.
ACCESS 2/3 SG -WAY KIT MANUAL User Manual fJ Important recommendations Before attempting any installation work, it is very important to verify how much space is available to fit the speakers into the vehicle. Key points: • For direct replacement of original speakers, please check there is enough space for your new Focal speakers. • Ensure the speaker is clean from debris and metallic particles that maybe attached (especially after drilling) • Do not touch the tweeter cone.
ACCESS 2/3 SG -WAY KIT MANUAL User Manual II Cables and connections • For best results with your Access speakers, we recommend you include the use of Focal cables. • Alternatively, other high quality cable can be used, if sufficient section thickness is available (minimum thickness = 1 mm 2 ). This is particularly important for long lengths of cable to ensure a strong efficient signal is maintained. • Always ensure the polarity is respected, ( + is connected to +) and (- is connected to-).
ACCESS 2/3 SG -WAY KIT MANUAL User Manual a 3-way kits connections ~. ~. !g~utput l. o«-= Input Woofer 0 0 Midrange g~ g Tweeter O nfJd1 0~ g~ =-»o] 00000 i . 8 TL...
ACCESS 2/3 SG -WAY KIT MANUAL User Manual II Fitting the crossover Locate the crossovers in a dry, preferably ventilated area, using either the screws supplied or double-sided tape. To open the box, squeeze the middle on the side, and remove the cover. In some cases, depending on your installation and the space available, it maybe easier to route the cables and connect to the crossover, before securing the crossover to the vehicle. Please check before.
ACCESS 2/3 SG -WAY KIT MANUAL User Manual Specifications 130A1 SG 165A1 SG 165A3 SG 2-way kit 2-way kit 3-way kit 5.12" (130mm) 6.5" ( 165mm) 4" (100mm) 6.5 (165mm) Maximum power 100W 120W 160W Nominal power sow 60W 80W Sensitivity (2.8V/1m) 91dB 92dB 90dB Frequency response 65Hz- 20kHz 60Hz-20kHz 55Hz-20kHz 4ohms 4ohms 4ohms 4.61" ( 11?mm) 5.35" ( 141mm) 3.?0" (94mm) 5.55" (141mm) 2.60" (66mm) 2.1?" ( SSmm) 2.
ACCESS 2/3 SG -WAY KIT MANUAL User Manual • What is the power for your amplifier? Access speakers are already highly efficient, with improved sensitivity. Therefore, their use with a high power head unit will provide comfortable listening pleasure. However used in a more high-end system, with separate amplification, the audio quality will be greatly improved. It is very important to know the rated power of the amplifier is suitable for the speakers used.
For the validation of the Focal guarantee, send back this sheet within 10 days to the following address: Fo ca 1- JMIa b - BP 3 7 4 - 1 0 8 1 rue de I I Aveni r - 4 2 3 53 La Ta I au die re c e d ex - FRANCE About yourself: Yourname: -------------------------------- Yourage: ________ Your job: ________________ Your full address :----------------------------- --------------- --------------- ---------Your e-mail address: -------------------------------------------------------------------- Your hobbies: At h