Owner's Manual

ACCESS
2/3
SG
-WAY
KIT
MANUAL
User
Manual
Fitting
the
crossover
Locate the crossovers in a dry,
preferably
ventilated
area,
using either the screws supplied
or
double-sided
tape.
To
open
the box, squeeze the
middle
on
the side,
and
remove the cover.
In
some cases,
depending
on
your
installation
and
the
space
available,
it
maybe
easier
to
route the
cables
and
connect
to
the crossover,
before
securing the crossover
to
the
vehicle. Please
check before.
Level
adjustment
of
tweeter
and
midrange
The
toggle
switch
found
inside the crossover,
allows
the user to adjust the tweeter
level.
II
This
user-friendly
option
allows
effective adjustments
to
be
made,
to
your
own
personal listening pleasure, plus
optimising
the infinite
amount
of
speaker
installation locations
available
.
This
allows
the system
to
be
"tailor
made"
to
your
vehicle, effectively
ensuring the best acoustics
are
possible.
Remember
too
much
treble
and
your
system
may
sound aggressive, thus suffer a
lose
of
dynamics, resulting
in
poor
definition.
Level
position
0
or
-3dB,
if
the tweeter
is
located
very
close
to
woofer-midrange,
or
in kick
panel,
for
the
2-way
kits,
or
+3,
OdB
for
the
3-way
kits.
Level
position -3
or
-6dB,
if
the tweeter
is
located
high in the
vehicle
(in the dash
or
high
in the doors) with the
woofer
positioned
comparatively
low
for
the
2-way
kits
and
0,
-3dB
for
the
3-way
kits.
Tweeter
level
adju
s
tment
-6dB
, -
3dB
a
nd
OdB