Specification Sheet

Black
Light
Wood
Dark
Wood
CHORA 826-D
Product data sheet
Slatefiber cone
6
½
" (16.5cm) midrange
5" (13cm) full-range
speaker driver
Slatefiber cone with
Al/Mg dome
Chora 826-D is the reference Home Cinema loudspeaker from the Chora line. Combining front channels and
vertical dimension, it immerses you in a 3D Home Cinema experience! The full-range speaker driver located on
the top of the loudspeaker uses sound wave reflection on the ceiling to reproduce the Dolby Atmos® eect. Its
highly directional bae also allows the spectator to accurately locate Dolby Atmos® eects, as though you had
loudspeakers built into the ceiling!
Aerodynamic front port
Tilted stand for
Time Alignment
Directional bae for
accurate and located
Dolby Atmos® eects
Key points
• 3-way floorstanding loudspeaker, Dolby Atmos® compatible
• Full-range speaker driver with directional baffle
for accurate and located Dolby Atmos® effects
• Slatefiber technology: a dynamic, rich and ultra-balanced sound
Type 3-way bass-reflex floorstanding
loudspeaker
1-way sealed
Speaker drivers
2x6
1/2
" (16.5cm) Slatefiber Woofer
6
1/2
" (16.5cm) Slatefiber Midrange
1" (25mm) TNF Al/Mg inverted
dome tweeter
5
1/8
” (13cm) full-range
speaker driver
Sensitivity (2,83V/1m)
91dB 91dB
Frequency response (±3 dB)
48Hz-28kHz 100Hz-20kHz
Low frequency point (-6 dB)
39Hz 90Hz
Nominal impedance
8Ω 6Ω
Minimum impedance
2.9Ω
Recommanded amplifier power
40/250W
Crossover frequency
270Hz - 2,700Hz
Dimensions (HxWxD)
41
7/ 1 6
"x11
15/16
x15
1/4
(105,3cmx30,3x38,8cm)
Net weight (with grille)
48.5lbs (22.2kg)
Packaging dimensions
(HxWxD)
44
1/2
"x13
3/8
x18
7/ 8
(113x34x48cm)
Net weight (with packaging)
59.5lbs (27kg)
Standard finishes
Focal
®
is a trademark of Focal-JMLab
®
- www.focal.com - SCLC - 03/12/2019 - SCCG - 25/01/2021
Aluminium/Magnesium
TNF Tweeter
Slatefiber cone
6
½
" (16.5cm) woofer