Manual

TWO AMPLIFIERS IN BRIDGED MODE (SEE GRAPHIC A3)

• TWO FDP 1.2000 amplifiers are required.

• Amplifier #1 will have

MASTER switch selected.

Amplifier #2 will have DIRECT switch selected.

• Crossover and level controls will only function on MASTER amplifier #1.

• By selecting DIRECT on amplifier #2 all crossover and level controls are bypassed and the LEFT input channel

must be used.

• Master Amplifier #1 will receive the source signal on left and right channels.

Master Amplifier #1 RCA “out -” will connect to direct amplifier #2 RCA “L IN”.

The LEFT input channel must be used.

• The (speaker +) will connect to Amplifier #1 (+ speaker).

The (speaker -) will connect to Amplifier #2 (+ speaker).

• The (speaker -) on Amplifier #1 will connect to (speaker -) on Amplifier #2.

SUBHARMONIC SYNTHESIZER

(Diagram below only shows

this portion of the amplifier)

RADIO

MASTER

DIRECT

A3: TWO AMPLIFIERS IN BRIDGE MODE

–

REMOTE SUB CONTROL

THESE CONTROLS ARE BYPASSED

SUBWOOFER