Manual

8
WARRANTY INFORMATION
Focal America / Orca Design & Manufacturing supports their products and guarantees them to be free of
manufacturing defects for a period of 1 year (non-transferrable) from the date of purchase, if purchased
from and authorized retailer. This time period is extended to 3 years (non-transferrable) from the date of
purchase, if the amplifier is purchased from and installed by an authorized retailer, and no alterations are
made to the installation or setup of the amplifier outside of the authorized retailer.
This manufacturing warranty does not extend to situations involving physical or installation damage, misuse,
abuse, or modification. If an amplifier malfunctions, please return it to the authorized retailer from which the
amplifier was purchased to have the amplifier and/or installation inspected and to have the warranty period
verified from date of purchase.
The authorized dealer will then work with Focal America / Orca Design & Manufacturing to obtain service, if
necessary. If found to be a defect due to manufacturing, the item will be repaired or replaced with a refurbished
amplifier. The amplifier will be returned to the authorized retailer when repairs are complete, so that the
dealer can return the amplifier to you, or reinstall the amplifier to maintain the above mentioned warranty
timeline.
TECHNICAL SPECIFICATIONS
• 1200w x 1 into 4 ohms
• 2000w x 1 into 2 ohms
• Not 1 ohm stable
• Two amps can be bridged to 2400w x 1 into 8
ohms
• Two amps can be bridged to 4000w x 1 into 4
ohms
• No 2 ohm bridged operation allowed
• THD .09%
• S/N – 105 dB
• Sub harmonic synthesizer with two bandpass
filters (30 Hz & 45 Hz) with external control (incl.)
• Sub Sonic (High Pass) Crossover - 8 Hz to 53 Hz,
48 dB/Octave Linkwitz-Riley
• Low Pass Crossover - 40 Hz to 350 Hz, 24dB/
octave Linkwitz-Riley
• RCA input can use BTL Source or common ground
source up to 8 volts
• RCA Line Outputs, one in phase for cascading amplifiers,
one anti phase for bridging.
• Continuous phase adjustment 0 – 180°
• Selectable Balanced/Unbalanced inputs
• Remote Control of Subwoofer Level, Subharmonic
Synthesizer Level, and Continuous phase adjustment
• Remote Control includes peak output level light
• Recommended DC Voltage operating range 11.5 to 14.4
Volts
• Maximum DC Voltage range 8 to 16 Volts
• Level control 350mV to 8v
• Twin frequency locked regulated power supplies
• Diagnostic and Protection LED panel showing Peak
Output, DC protect, 135 deg F, 158 deg F, Over Current,
Over Voltage and Fuses.
• Length 19” Width 8” Height 2”
• Weight 12 lbs
• Fuse 6 x 25 Amp ATC
For more information and technical specs, visit us online at: http://Focal-America.com