Manual

3
IF YOU ARE USING TWO SUBWOOFERS:
• (SEE GRAPHIC B2)
• Put your woofer/tweeters on channel 1+2.
Set 1+2 switch to HP.
Adjust 1+2 HP frequency to 50 Hz.
• Subwoofers on channel 3+4.
Set 3+4 switch to LP/BP.
Set 3+4 switch to LP.
Adjust 3+4 LP frequency to 50 Hz.
Set the switch to MONO.
Plug in the remote sub control.
RADIO
LP LP/BP50Hz
3+450Hz HP
MONO
B2
+–
SUBWOOFER
+–
SUBWOOFER
REMOTE SUB CONTROL
XOVER
XOVER
B2 <GRAPHIC of Source Radio to input channel 3+4 of amplifier. Woofer/Tweeter/Xover on channels 1+2, one