Owner's Manual

75Hz6 FLAT or HP

75Hz

FLAT or HP

75Hz FLAT or HP

C1 (6 CHANNEL STEREO NON-BRIDGED)

RADIO

XOVER

XOVERXOVER

XOVER XOVER

IF YOU ARE USING TWO SUBWOOFERS (SEE GRAPHIC C2 BELOW)

• Put your woofer/tweeters on channel 1+2, 3+4.

Set 1+2, 3+4 switch to HP.

Adjust 1+2, 3+4 HP frequency to 75 Hz.

• Subwoofers on channel 5+6.

Set channel 5+6 switch to LP/BP.

Set channel 5+6 MODE switch to SUB.

Plug in the remote sub control.

Adjust the 5+6 LP frequency to 75 Hz.

For a sealed box adjust the 5+6 HP frequency to 20 Hz.

For a vented box adjust the 5+6 HP frequency 5 Hz lower than the port tune frequency.

REMOTE SUB CONTROL

+–

SUBWOOFER

+–

SUBWOOFER

75Hz6 HP

75Hz20Hz SUB

LP/BP

75Hz HP

C2 (IF YOU ARE USING TWO SUBWOOFERS)

RADIO

XOVER

XOVER XOVER

5 CHANNEL WITH BRIDGED SUBWOOFER (SEE GRAPHIC C3 ON PG 4)

• If you have two input wires from the source deck plug them into inputs 1+2.

Set INPUT switch to 2.

• If you have four input wires from the source deck plug them into inputs 1+2 and 3+4.

Set INPUT switch to 4.

• If you have five input wires from the source deck plug them into inputs 1+2 and 3+4. The subwoofer plugs into

channel 5. Set channel 5+6 MODE switch to SUB.

Set INPUT switch to 6.