Owner's Manual

11
TECHNICAL SPECIFICATIONS
4 x 150w RMS into 4 ohms @ 1% THD
4 x 200w RMS into 2 ohms @ 1% THD
2 x 400w RMS Bridged into 4 ohms @ 1% THD
Do NOT bridge into 2 ohms.
All power ratings are at 14.4v DC.
Frequency Response: 20 – 30KHz + or -, 1dB
Signal/Noise Ratio: 95dB (A)
Input Voltage for rated output unbalanced: 300mv – 8v
Input Voltage for rated output balanced: 600mv – 16v
Damping factor at 20Hz at 4 ohm: 75
Input Impedance unbalanced: 11K ohm
Input Impedance balanced: 22K ohm
LPF 45 – 150Hz 12dB/octave Linkwitz Riley
HPF 10 – 150Hz 12dB/octave Linkwitz Riley, Switchable to 6dB/octave Butterworth
Protection: DC, Short Circuit, Thermal, Polarity Reversal.
Dimensions: 8 1/4” (208mm) x 5” (127mm) x 1 5/8” (41mm)
Power Fuse: 50 Amps