Specification

SHAPE 65
Product Specification Sheet
Focal
®
is a trademark of Focal-JMLab
®
- www.focal.com - SCBC170302/1
Key points
• Low tweeter directivity for a flexible listening position
• Designed without a port allowing it to be placed near a wall
• Numerous settings for optimal integration
• Accurate control, even in the very high end
• Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers
• Fastening mechanisms present on the back and underneath the loudspeaker: for installing on the ceiling or a wall
(fastening accessories not supplied)
• Threads for ceilling and wall mounts (fastening accessories not supplied)
Shape 65 is the reference of the Shape line. Although it’s dedicated to nearfield monitoring, this monitor enables extraordinary
monitoring quality, in the lowest to the highest frequencies. Simply a must, this monitor will express its full potential from a
listening distance of three feet away (1 metre).
6.5" double passive radiator
XLR and
RCA inputs
Two Class AB
amplifiers
Adjustable bass
and treble
Releasable
high-pass filter
Adjustable
crossover at 160Hz
1" “M”-shaped
aluminum/magnesium
inverted dome tweeter
6.5" Flax sandwich cone
woofer
TMD surround
N. I. C. magnetic
circuit
MDF cabinet with
natural walnut veneer
System SHAPE 65
• Frequency response (+/-3dB) 40Hz - 35kHz
• Maximum SPL (musical signal)
109dB SPL
(peak @ 1m)
Electronic section
• Inputs/
Impedance
Type XLR: balanced 10kOhms
Connectors
RCA: unbalanced 10kOhms with
sensitivity compensation
• Midrange and low frequency
amplier
80W, class AB
• High frequency amplier 25W, class AB
• Automatic
standby
Standby on
After approximately 30
minutes with no signal
Standby o Signal detection > 3 mV
• Electrical
supply
Voltages
220-240V
(T1AL / 250V fuse)
or 100-120V
(T2AL / 250V fuse)
Connection
IEC plug and detachable power
cord
• Settings
High pass lter
Adjustable Full range
45/60/90Hz
Bass
(0 - 250Hz)
Adjustable, +/-6dB
• Settings
Midrange/bass
(160Hz, Q=1)
Adjustable, +/-3dB
High (4.5 - 35kHz) Adjustable, +/-3dB
Power On/Power O On/o switch on rear panel
• Standby consumption < 0.5W
• Displays and controls
LED for power on/o and
standby
Transducers
• Woofer
6.5" (16,5cm)
Flax Cone
• Tweeter
1" (25mm) 'M' profile
Aluminum-Magnesium
Cabinet
• Construction 0.6" (15mm) MDF
• Finish
Vinyl, real walnut and black
painting
• Dimensions with four rubber feet
(HxWxD)
14 x 8.6 x 11.2"
(355 x 218 x 285mm)
• Weight 28.2lb (8.5kg)