Car Amplifier Specification Sheet

Specications
Focal® is a trademark of Focal-JMlab® - BP 374 - 108, rue de l’Avenir - 42353 La Talaudière cedex
France - Tél. [phone] - Fax [phone] - www.focal-fr.com - SCBD081505/1
Preliminary specifications
SOLID 2
2 channel class AB power amplifier
• High and low level inputs
• Stable into 2 Ohms (stereo mode)
• Pseudo-balanced RCA input
Mechanical Drawing
Nominal power measured at
14.4V continuously @ 4Ω
2 x 75W
Nominal power measured at
14.4V continuously @ 2Ω
2 x 100W
Power in bridge mode
measured at 14.4V
continuously @ 4Ω
1 x 200W
Signal/noise ratio
> 77dB (A)
Damping factor at 4Ω
100 to 1kHz
Frequency response (-1dB)
10 Hz – 60kHz
Input impedance
20kΩ
Input sensitivity
0.2 – 5V
Input sensitivity high level
0.4 - 9Vrms
High-pass crossover
(1/2 and 3/4 channels)
50 – 150Hz (12
dB/oct.)
Low-pass crossover
(sub channel)
50 – 150Hz (12
dB/oct.)
Remote control (sub channel)
-
Adjustable bass boost level
-
Variable phase (SUB)
-
Subsonic lter
-
Maximum cross section of
loudspeaker cables
10mm
2
7 AWG
Maximum cross section of
power cables
35mm
2
2 AWG
Protections
Short-circuit
Thermal overload
Overvoltage
Polarity reversal
Dimensions (HxWxD)
1
3/4
x 8
2/3
x 7
7/8
”
(45 x 220 x 200mm)
THD / Power
A
udio Precision
THD vs POWER @ 4ohm
0.003
10
0.005
0.01
0.02
0.05
0.1
0.2
0.5
1
2
5
%
1 2002 5 10 20 50 100
W
FOCAL
Input high level sensitivity