User's Manual

Edge 2 – User Manual MIXTILE

20 CAMERA0_RST_L_GPIO4_B5 IO Output GPIO output for camera reset

21 CAMERA0_PDN_L_GPIO4_B4 IO Output GPIO output for camera disable

22 CAMERA0_PWREN_GPIO1_D4 IO Output GPIO output for camera enable

23 I2C4_SCL_M0 IO Output I2C clock signal

24 I2C4_SDA_M0 IO Input I2C data signal

25 PWM14_M0 IO Output PWM Output signal

26 GND GND - Ground

27 GND GND - Ground

28 5V PWR Output 5V @ 500mA Max in total

29 5V PWR Output 5V @ 500mA Max in total

30 5V PWR Output 5V @ 500mA Max in total

31 GND GND - Ground

32 NC - - Not connected pin

33 NC - - Not connected pin

34 NC - - Not connected pin

35 GND GND - Ground

36 MIPI_MCLK1 IO Output CLOCK output for camera

37 GND GND - Ground

38 MIPI_CSI_RX_CLK1N LVDS Input MIPI_CSI clock signal Negative

39 MIPI_CSI_RX_CLK1P LVDS Input MIPI_CSI clock signal Positive

40 GND GND - Ground

2.17 M.2

Name

Type

Input/

Output

Signal Description

1 NC - - Not connected pin

2 3.8V PWR Output 3.8V @ 3A Max in total

3 GND GND - Ground

4 3.8V PWR Output 3.8V @ 3A Max in total

5 GND GND - Ground

6 M2_ONOFF_GPIO1_D2 IO Output GPIO output for on or off to module

7 HUB_HOST3_DP LVDS I/O USB2.0 data signal Positive

8 NC - - Not connected pin

9 HUB_HOST3_DM LVDS I/O USB2.0 data signal Negative

10 M2_LED1 IO Input Connect negative for network status

11 GND GND - Ground

20 NC - - Not connected pin

21 NC - - Not connected pin

22 NC - - Not connected pin

23 M2_WAKE_GPIO0_B7 IO Input GPIO for module to wakeup CPU

24 NC - - Not connected pin

25 NC - - Not connected pin