User Manual

TView Gold User’s Guide

Chapter 2

5. Connect the male end of your computer’s monitor cable to

the video pass-through port on the UniViewer cable.

This port is located on the UniViewer cable itself, at the

end of the cable that is connected to the “Monitor out” port

on the computer.

6. Connect the female end of the monitor cable to the

monitor.

7. Connect the power adapter to the rear of the TView Gold.

Plug the adapter into the nearest wall outlet. The red

power LED at the front of the unit will illuminate, indicating

the TView Gold is ON.

Is it possible to have a Apple G4 Desktop

work with a Focus Enhancements TView

Gold in Video Mirroring Mode?

This depends on which model G4 computer (Figure

1) you have as well as what type of Monitor Display

you are using. If using a standard Mutisync VGA

Monitor or a Apple Studio Display 17 or 21 with

any G4 model listed below then there are no issues.

Note: See Figure 2 and Figure 3 for Monitor

Display Connector.

Figure 1

Mac G4 Model With VGA Monitor With ADC/DVI