User Manual

TView Gold User’s Guide
Chapter 2
17
Note: The S-Video connection is a newer video standard.
This type connection improves color, clarity, and
resolution. It is recommended that if S-Video
connection is available it be used.
Figure 2-4: S-Video Connectors
To determine if your television or supports S-Video, look for a
port at the rear of the television that matches the S-Video
output port at the rear of the TView Gold Unit.
Note: The S-Video port on the television may or may not
be labeled "S-Video in."
When you are looking at the television to make these
connections, you may see an input labeled ANT IN. This input
is used by cable TV companies and uses a different type of
video than that used by TView Gold . It is not possible to
connect directly to this input. If this is the only input available,
and you do not have a VCR, this input can be used with an RF
modulator. See below for further information.
To connect the TView Gold unit to your television, perform
the following steps:
1. Connect one end of the supplied composite video cable or
S-Video cable to the port at the rear of the TView Gold