User Manual

TView Gold User’s Guide

Hardware Installation

of the television.

2. Connect one end of the composite video cable to the port

labeled "Comp Video" at the rear of the TView Gold unit.

3. Connect the other end of the composite video cable to the

RF Modulator’s Composite Input at the rear of the

television.

4. Plug RF modulator into wall outlet or surge protector

5. Turn your computer on.

6. Turn the TView Gold on.

7. Turn the television on. If the cables have been connected

correctly, the image from the computer monitor should

now appear on the television screen.

Connecting the TView Gold to a VCR

In certain configurations, the video will be run through a VCR.

Therefore the unit must be connected to the VCR. By

connecting the TView Gold unit you will also be able to record

the computer screen to videotape.

To connect your TView Gold to a VCR, perform the

following steps:

1. Connect one end of the supplied composite video cable or

S-Video cable to the port at the rear of the TView Gold

labeled either "Comp Video" or "S-Video".

2. Connect the other end of the composite cable or S-Video