User Manual

TView Gold User’s Guide
Chapter 2
21
cable to the port at the rear of your VCR labeled "Video
Input" or “AUX-IN,” “AV-IN,” or “S-VIDEO IN.”
3. Turn on the VCR.
4. Turn on your television and tune it to channel 3 or 4.
5. Turn the TView Gold unit on.
6. Turn the computer on.
7. Find a button on the front of the VCR called "Line,"
"TV/Video," "Video Input," or something similar. Press the
button. If the cables have been connected correctly, the
image from the computer monitor should now appear on
the television screen.
Note If your VCR does not have a button specifying
video-in, use your VCR’s remote control to find an
on-screen programming system. Using the
programming system, set the VCR to receive
external video. If you are unsure about how to do
this, refer to the VCR owner’s manual.