Disk Recorder User Guide FS-2, FS-2E

FS-2/2E Studio DTE Disk Recorder User Guide
113
Reference
5.1.2 Control
• GPI & RS-232C Control (1 x 3.5mm mini jack)
• RS-422 (1 x DB9 Serial)
5.1.3 Power
• 110V to 220V AC, 50 - 60 Hz, Auto Ranging 100W
•IEC Power Input
5.1.4 Physical Specification
• 18.41lbs (8.36kg)
• 19" x 17.3" x 3.5" (483mm x 440mm x 89mm)
5.1.5 Audio/Video/Timecode Specification
• 25Mb/s, 8-bit 4:1:1 (NTSC-DV) or 4:2:0 (PAL-DV) video (user
switchable)
• SMPTE or DV embedded or External Timecode (Drop or Non Drop)
• 2-ch., 16-bit embedded Digital Audio
Stereo Audio Monitor (1 x 1/4” TRS jack)
General Audio Specifications
Balanced Inputs
• Input Impedance 600 Ohms +/-10 Ohms
• Quantization 16 bits 48Khz
• Common mode rejection @1 KHz (dB) 100 dB
• Analog Input adjustment range -34dB to +4.5dB
(in 1.5dB steps, default setting 0dB)
• Amplitude with no clipping 3.5Vp-p
Balanced Outputs
• THD@1 Khz Less than 0.05%
• Channel Separation 100 dBu (@ 1 Khz 70 dB)
• SNR 82 db, A weighted
• Quantization 16 bits 48Khz
• Output Impedance 600 Ohms +/-10 Ohms
• Bandwidth at -3dB points 24Khz
Headphone Output (1 x 1/4” TRS jack w/ level control)
• Headphone adjustment range -73dBdB to +4.5dB
• Headphone Output Impedance - 32 Ohms, 32mW
AES/EBU Digital Audio (1 x XLR in, 1 x XLR out)
Reference Video Loop Through (2 x BNC)
DV Video I/O - 25 Mb/s (1 x 6-pin IEEE-1394)
DV Video Pass Through - up to 400 Mb/s (1 x 6-pin IEEE-1394)
External HDD I/O - up to 400 Mb/s (1 x 6-pin IEEE-1394)
FireWire Computer I/F (1 x 6-pin IEEE-1394)
10/100 Base-T Ethernet