Disk Recorder User Guide FS-2, FS-2E

FS-2/2E Studio DTE Disk Recorder User Guide
117
Reference
5.5 Jog Speed Parameters
5.6 Custom Commands
The following commands are currently supported.
Command Parameters
Pause 0
Step 1 Frame 1 to 200
Play Slow 4 201 to 300
Play Slow 3 301 to 400
Play Slow 2 401 to 500
Play Slow 1 501 to 800
Play Normal 1000 to 8999
Warnings
No feedback occurs indicating that the command was processed
successfully.
The FS2/2E must be in STOP mode before sending these commands
Only positive values of contrast, saturation, H phase, SC phase, hue, and
brightness are allowed
When deleting multiple tracks, delete the last track first, then work your
way to the first track. A delete command causes the track list to be re-
built. Shifting all tracks up.
Send the CSUM command at the end of each command.