Disk Recorder User Guide FS-2, FS-2E

FS-2/2E Studio DTE Disk Recorder User Guide
9
Introduction
Input selections are either Composite, Y/C (S-Video), Component, SDI
or DV. An audio source must be selected for each input using the
SETUP > AUDIO INPUT menu, the Timecode mode in the
SETUP > TC MODE menu, and the reference video source in the
SETUP > GENLOCK > SOURCE menu. For component inputs/outputs
you must select the video standard when used in
NTSC mode only.
Refer to
Compnt Level on page 76 for more details.
•
LCD Display
The FS-2/2E LCD displays the FS-2/2E’s current status including
track number, disk number, timecode, record / playback mode as well
as other information. It also displays the FS-2/2E menu system. The
LCD is a green backlit 128x64 graphical display.
•
Transport Control Keys
This set of keys controls playback and record functions of the FS-2/2E.
These functions include play, reverse play, fast forward, fast rewind,
forward frame, back frame, next track, previous track, stop, record,
and so on.
•
Display Soft Keys
This set of keys enables you to navigate the FS-2/2E menus. The
function of the keys varies depending on what is displayed at the base
of the FS-2/2E LCD. Refer to
LCD Menu Soft Keys on page 22 for more
information.
•
Headphone Jack (3.5mm) and Volume Knob
This jack is for connecting a pair of monitor headphones. You can
monitor audio of the selected input (even if E-E is not selected) when
not in record mode. When in record or playback mode, you can
monitor the current audio. The headphone jack also includes a volume
control.