Disk Recorder User Guide FS-2, FS-2E
FS-2/2E Functions
FS-2/2E Studio DTE Disk Recorder User Guide  
20
2.1.2 Utility Function Keys
2.1.2.1 OSD - (On Screen Display)
Press this key to enable on screen display on the monitor output 
(composite). When off, the key will not light.
2.1.2.2 HDD – Hard Disk Drive Bypass Key
Press this key to immediately open the HDD Bypass confirm 
screen as described in the HDD Bypass section of the Menu. For 
more information, refer to 
HDD Bypass on page 50
2.1.2.3 LOCK – Keypad Lock Key
This key turns lock on or off. When the key is lit, the keypad is 
locked. When off, it is not locked.
2.1.2.4 REMOTE – Remote Key
When you press this key, the FS-2/2E goes directly to the 
REMOTE mode as described under the Control Modes menu. The 
key lights in Local mode. When in the FS-2/2E is in remote mode, 
you cannot use front panel keys for operation.
Another press exits REMOTE mode and the backlight turns off.
2.1.2.5 E-E – Electronic to Electronic Key
When you press this key, the selected input is passed on to all 
outputs on the FS-2/2E. The E-E mode is only active when the 
FS-2/2E is in 
STOP mode.










