Disk Recorder User Guide FS-2, FS-2E

FS-2/2E Functions
FS-2/2E Studio DTE Disk Recorder User Guide
24
2.3.3 | Forward Index
Press this key to skip forward to the next sequential clip for playback.
• To skip ahead 10 clips per increment, holding down
Forward Index.
• To select the next disk drive, press
SHIFT and then Forward Index.
2.3.4  Stop
Press this key to Stop the selected mode and return the FS-/2E to Pause.
Press it again to put the FS-2/2E into
STOP (standby with menu screen).
The splash screen is the first frame of the selected clip when you select
SETUP > STOP OUTPUT > CLIP PREVIEW. When the FS-2/2E is in Stop
mode, the key lights.
2.3.5  Play
Press this key to start playback of the selected clip. If you press the SHIFT
and
PLAY keys, the FS-2/2E immediately goes into Reverse Play mode.
2.3.6  Record Key
Press this key once when the FS-2/2E is in STOP mode and the FS-2/2E
goes into
REC-PAUSE. The REC button flashes. Press it again to start
recording. If you press
REC during a recording, the current clip is closed
and a new clip is created without dropping any frames. This key is the only
key that is RED on the front panel.
If you press
REC and SHIFT simultaneously, the FS-2/2E captures a single
frame of video. In a particular session, all single frames of video are saved
as part of the same clip on disk.
2.3.7 SHIFT
Use the SHIFT key to give particular keys a secondary functionality. When
you press it, the SHIFT key lights and remains in
SHIFT mode until the
button is released. The SHIFT mode of particular keys is listed below that
key or displayed on the FS-2/2E LCD.
2.3.8  Back Search
Press the Back Search button to allow video to be played at different speeds
(both slower and faster than real-time). Refer to the note under
Forward
Search Key
for more information.