Disk Recorder User Guide FS-2, FS-2E
FS-2/2E Functions
FS-2/2E Studio DTE Disk Recorder User Guide
62
2.5.12.10 TC Set
This menu allows you to set Timecode values for various modes.
It also allows the selection of drop or non-drop frame (NTSC only)
settings.
Once a timecode value is set and the FS-2/2E is set to REC RUN or
FREE RUN timecode settings, the TC preset value becomes the
starting point for timecode. Use this menu as follows:
1. Display this menu item by selecting it.
2. Press SEL to open the sub menu of choice.
3. Press EXIT to return to the menu screen.
4. For TC PRESET, scroll from field to field using the
FORWARD and BACK INDEX buttons.
5. Press and to scroll through digits in the value.
6. Press EXIT to return to the menu screen.
2.5.12.10.1 TC Preset
This selection allows you to set the starting timecode
value for future recordings.
1. For UB Preset, scroll from field to field using the
FORWARD and BACK INDEX buttons.
2. Press and to scroll through the hex digits in
the value.
The FS-2E, or FS-2 (with the 2.0 upgrade), has the added ability to delay
the recorded timecode relative to the content.
TC PRESET
UB PRESET
TC DELAY
DROP/NON DROP
EXIT
SEL
TC PRESET
00:00:00:00
| & |
MOVES CURSOR
EXIT