Disk Recorder User Guide FS-2, FS-2E

FS-2/2E Functions
FS-2/2E Studio DTE Disk Recorder User Guide
64
2.5.12.11 On Screen Display
This selection allows you to turn on or off the on-screen display
on FS-2/2E's Monitor Output. The highlighted item is saved after
exit.
When you select ABS, the absolute timecode value, or amount of
time recorded to the disk, appears on the bottom center of the
monitor output.
When you select
TC, the TC (Counter) timecode value appears on
the bottom center of the monitor output.
When you select
MENU, the FS-2/2E Menu appears in the top left
corner of the monitor output.
1. Press  and  to scroll though the selections.
2. Press EXIT to return to the menu screen.
2.5.12.12 FF/RW Hi Res
This screen enables or disables the FS-2/2E forward and reverse
search high resolution mode. When enabled the following search
speeds are available:
•
REVERSE: -30X, -25X, -18X, -15X, -12X, -10X, -8X, -5X, -4X, -
3X, -2X, -1/30, -1/15, -1/10, -1/6, -1/5, -1/3,-1/2
•
FORWARD: +30X, +25X, +18X, +15X, +12X, +10X, +8X, +5X,
+4X, +3X, +2X, +1/30, +1/15, +1/10, +1/6, +1/5, +1/3, +1/2
By repeatedly pressing the front panel OSD key, you can cycle between
these modes.
ABS
TC
MENU
OFF
EXIT


ENABLE
DISABLE
EXIT

