Disk Recorder User Guide FS-2, FS-2E

FS-2/2E Studio DTE Disk Recorder User Guide
73
FS-2/2E Functions
2.5.12.20.3 VIEW IP INFO
In cases where DHCP is being used, by selecting VIEW
IP INFO
, you can see the IP address that the network
has provided the FS-2/2E.
If the FS-2/2E is not connected to a network or was
not able to successfully log on, this screen displays
DHCP DISABLED NOT CONNECTED. Check your
settings or contact your system administrator for
further assistance.
2.5.12.20.4 SERVICES
The SERVICES menu allows you to enable or disable
any of these services:
FTP, TELNET, or WEB
connection. With each, it is necessary to enable or
disable the function within the submenu.
Once
FTP is enabled you can use your web browser or
ftp utility to transfer files to and from the FS-2/2E.
With
TELNET enabled, you can send commands to
control the FS-2/2E with a telnet utility.
With
WEB enabled, you can control the FS-2/2E from
your web browser. Type in the FS-2/2E IP address
into the address bar of your browser to start using the
web interface. Only an FS-2E or FS-2 (with the 2.0
firmware upgrade) has this option available.
IP 000.000
000.00
MSK 255.255
255.000
GW 000.000
000.000
NEXT
 
FTP
TELNET
WEB
EXIT
SEL



