AcceSSorieS - Specification Sheets User Manual

ManualsBrandsFocus Foodservice ManualsFurnitureShelving

Item #

Job

WIRE SHELVING ACCESSORIES

Shelf Ledges -

Dimensions: 4" (100 mm)

Item No. Item No. Item No. Length

Chromate Black Epoxy Green Epoxy* (in) (mm)

FL144BK 14 356

FL184C FL184BK FSL184FPS 18 457

FL214C FL214BK FSL214FPS 21 533

FL244C FL244BK FSL244FPS 24 610

FSL304FPS 30 762

FL364C FL364BK FSL364FPS 36 914

FL484C FL484BK FSL484FPS 48 1219

FL604C FL604BK FSL604FPS 60 1524

Shelf Dividers -

Dimensions: 8" (200 mm)

Item No. Item No. Shelf Width

Chromate Black Epoxy (in) (mm)

FSD14BK 14 356

FSD18C FSD18BK 18 457

FSD21BK 21 533

FSD24C FSD24BK 24 610

Shelf Labels

Snap On

Black Plastic

Snap On

Clear Plastic

Slide Under Truss

Black Plastic

Size

(in) (mm)

FSHELF3B FSHELF3CL FUTL3BK 3 x 1

/4 76 x 32

FSHELF6B FSHELF6CL FUTL6BK 6 x 1

/4 152 x 32

FSHELF43CL 43" (109.2 cm) ﬁts 48" (122.0 cm) long shelves

FSHELF54CL 54" (137.2 cm) ﬁts 60" (152.4 cm) long shelves

Plastic Split

Sleeves

Green Epoxy shelf ledges feature our SaniGard

™

Anti-Microbial Protection.

Suitable for use with all Focus Shelving units including FPS-PLUS

™

(as shown).

Chromate and

Black Epoxy Style

*Green

Epoxy Style

WIRE SHELVING

ACCESSORIES

• To promote safety, use ledges to keep items from protruding or

falling from shelves. Ledges can be installed on the back or sides of

shelving units. Ledges can be stacked on top of each other for an

8" or higher barrier.

• Shelf dividers allow you to compartmentalize shelves, keeping

shelf contents orderly. Dividers snap into place, allowing for easy

adjustment to the exact size of the section required.

• One bag included with each shelf. Packed 4 pairs per bag.

Item No. 30058

• Your choice of snap on front of shelves or slide under truss ver-

sions. Provides an easy way to identify contents on shelves. Holds

most commercial 1¼" (3.2 cm) labels. Paper labels not included.

Focus Foodservice, LLC • 300 Knightsbridge Parkway, Suite 500 • Lincolnshire, IL 60069 • www.focusfoodservice.com

Summary of content (2 pages)

PAGE 1
Item # Job Shelf Ledges - • To promote safety, use ledges to keep items from protruding or falling from shelves. Ledges can be installed on the back or sides of shelving units. Ledges can be stacked on top of each other for an 8" or higher barrier. Dimensions: 4" (100 mm) Item No. Chromate Chromate and Black Epoxy Style *Green Epoxy Style Shelf Dividers Dimensions: 8" (200 mm) FL184C FL214C FL244C Item No.
PAGE 2
WIRE SHELVING ACCESSORIES "S" Hooks Job • Used to “add on” shelving units with only 2 posts required. Hook goes over the edge of the post supported shelf and under the edge of the add-on shelf. Can be used to join units end-to-end, back-to-back, or at right angles. Two “S” hooks required for each connection. Item No. 93333 93333GN 93333BK Post Clamps Description Chrome plated Green epoxy coated Black epoxy coated • Secure shelving units together for maximum strength.