User Guide
Front and Rear Connectivity
Analogue Channel Inputs:
Mic input: XLR x
Line input: XLR x and TRS x
Instrument input TS Jack x
External ADC input: TRS Jack x
Return: TRS Jack x
Analogue Channel Outputs:
Send: TRS Jack x
Balanced line output: XLR x
DI output: XLR x
DI through: TS Jack x
Analogue Channel Additional I/O:
Cue mix left input: TRS Jack x
Cue mix right input: TRS Jack x
Headphones output: ¼” TRS Jack x
Warranty
All Focusrite products are covered by a warranty against manufacturing defects in material or craftsmanship for a period of one
year from the date of purchase. Focusrite in the UK, or its authorised distributors worldwide, will do their best to ensure that any
fault is remedied as quickly as possible. This warranty is in addition to your statutory rights.
This warranty does not cover any of the following:
Carriage to and from the dealer or factory for inspection or repair
Labour charge if repaired other than by the distributor in the country of purchase or Focusrite in the UK
Consequential loss or damage, direct or indirect, of any kind, however caused
Any damage or faults caused by abuse, negligence, improper operation, storage or maintenance
If a product is faulty, please rst contact the dealer from which the product was purchased. If the product is to be shipped back,
please ensure that it is packed correctly, preferably in the original packing materials. We will do our best to remedy the fault as
quickly as possible.
Please help us to serve you better by completing and returning the Warranty Registration Card, or registering online at http://www.
focusrite.com. Thank you.
Accuracy
Whilst every effort has been made to ensure the accuracy and content of this manual, Focusrite Audio Engineering Ltd makes no
representations or warranties regarding the contents.
Copyright
© 007-008 Focusrite Audio Engineering Ltd. All rights reserved. No part of this manual may be reproduced, photocopied, stored
on a retrieval system, transmitted or passed to a third party by any means or in any form without
the express prior consent of Focusrite Audio Engineering Ltd. ADAT™ is a registered trade mark of Alesis Corporation Inc. E & O.E.
•
•
•
•