User Guide
Warnings & Cautions
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING, AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS
VENTILATION SHALL NOT BE IMPEDED BY COVERING THE VENTILATION OPENINGS WITH ITEMS, SUCH AS NEWSPAPERS,
CLOTHS, CURTAINS ETC.
NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS
MAINS LEAD - THIS EQUIPMENT MUST BE EARTHED AND FITTED WITH THE CORRECT LEAD FOR THE COUNTRY OF OPERATION.
THIS WILL NORMALLY BE ACHIEVED FROM THE CORRECT MAINS SUPPLY SOCKET
DO NOT USE A DAMAGED OR FRAYED POWER CORD
IF THE MAINS PLUG SUPPLYING THIS APPARATUS INCORPORATES A FUSE THEN IT SHOULD ONLY BE REPLACED WITH A FUSE
OF IDENTICAL OR LOWER RUPTURE VALUE
SHOULD THE APPARATUS OR SUPPLY CORD BECOME PHYSICALLY DAMAGED THEN IT SHOULD NOT BE POWERED, AND ADVICE
SHOULD BE SOUGHT FROM SUITABLY QUALIFIED PERSONNEL
THIS UNIT MUST BE EARTHED BY THE POWER CORD
UNDER NO CIRCUMSTANCES SHOULD THE MAINS EARTH BE DISCONNECTED FROM THE MAINS LEAD
This unit is capable of operating over a range of mains voltages as marked on the rear panel. Ensure correct mains voltage setting
and correct fuse before connecting mains supply. Do not change mains voltage settings while mains supply is connected. To avoid
the risk of re, replace the mains fuse only with the correct value fuse, as marked on the rear panel. The internal power supply unit
contains no user serviceable parts. Refer all servicing to a qualied service engineer, through the appropriate Focusrite dealer.