User Manual

GET STARTED WITH SCARLETT 6i6, 18i8 & 18i20
Thanks for choosing the Scarlett 2
nd
Gen. as your audio interface.
For an in depth video tutorial, please go to focusrite.com/get-
started or see the quick step guide below...
Mac Users
1. Please go to: focusrite.com/register
2. Enter your serial number, found on the bottom of your hardware
3. Then, enter your PRODUCT BUNDLE CODE found on the
inside of the product box
4. Download and install the Focusrite Control software installer for
your operating system
5. Run the installer
6. Connect your Scarlett audio interface with the included IEC
power cable, connect the device to your Mac using the included
USB cable then power up the unit
7. Go to "System Preferences" then "Sound" and select your
Scarlett Eg. "Scarlett 18i20" as the input and output device
8. You are now ready to use your audio interface
(Please Note: You may need to select the Scarlett as your
interface within your music software preferences)
Windows Users
1. Please go to: focusrite.com/register
2. Enter your serial number, found on the bottom of your hardware
3. Then, enter your PRODUCT BUNDLE CODE found on the
inside of the product box
4. Download and install the Focusrite Control software installer for
your operating system (includes drivers)

Summary of content (2 pages)