User Manual

16
Routing section
The routing section allows you to set up which audio sources are to be routed directly to which physical outputs.
The routing section displays every physical output on the Saffire PRO 14. An audio stream can be routed to an output using the
dropdown menu to the left of the output.
Clicking on the box to the left of the output label will bring up a list of all available audio output sources.
The available sources include:
• All inputs (Analogue 1-4, S/PDIF)
• All DAW playback streams (DAW 1 - 12)
• All mixes from the mixer (Mix 1 - 6)
If you have named the mix (by clicking in the track name section – see previous chapter) then this name is displayed as the mix
source name.
Note that the routing section is linked to the selection made for the output channel destination set-up in the mixer. If you have
outputs pre-assigned from when you created your Mix, you will see the routing selections have been set up. Similarly, if you change
the audio source from the routing section, the output of the mix will change automatically.
Routing audio to the headphones
The headphone symbol in the router denotes the source for the left and right ears of the headphones. The headphone left ear is a
copy of line output 3 and the right ear a copy of line output 4. All audio routed to line outputs 3 and 4 will be heard in headphone left
and right respectively.