User Manual

20
Monitor Presets
Preset Name Output
Off - no monitor control buttons enabled, therefore no sound will come out of any analogue output
Mono - outputs only to the centre / mono speaker (Line output 3.) All other channels are muted
Output - 3
Stereo - outputs to stereo speakers (monitor 1 and 2 output.) All other channels are muted
Outputs - 1, 2
Quad - outputs to monitor 1 and 2 outputs and line 3 and 4 outputs. All other channels are muted
Outputs - 1, 2, 3, 4
2.1 Surround - outputs to stereo speakers (monitor 1 and 2 output) and sub (Line output 4)
Outputs - 1, 2, 4
Mid + Phones 1 - outputs to mid speakers and headphones 1
Outputs - 3, 4
Monitor Section controls
The following controls in the Monitor Section will affect those channels that have been selected for monitor control (indicated with a
blue button, see above).
Monitor level control knob
Set the output level of all assigned outputs using this knob. The output level can be adjusted using the mouse and will affect all
assigned outputs (as indicated with a blue button). The dB display below shows the current level to which the monitor knob is set.
Note that the front panel Monitor control affects only outputs 1 and 2, and is an additional volume control on top of the monitor level
set in Saffire MixControl software.
Dim switch
Attenuates the output level by 18dB.
Mute switch
Mutes the output.
Left Mute switch
Mutes the left output.
Right Mute switch
Mutes the right output.
Remember that these dim and mute buttons only affect the outputs selected for control (i.e. Blue) in the monitor
control section.