User Manual

27
Unit 1 Setup Cue Mix (unit 1)
Open Saffire MixControl.
Click on the first mixer tab.
Ensure that the mixer output is stereo by clicking on the stereo button (below the meters of the output channel).
Add the analogue inputs to the mixer, and set the required levels and panning.
Add the S/PDIF input to the mixer (this is the feed from unit 2).
Rename the mix to “Cue Mix” (or similar) by clicking on the name field (below the meters of the output channel).
This mix will be a combination of the audio that you are recording (unit 1 inputs), and the S/PDIF output mix from Unit 2 (connected to
the S/PDIF input of unit 1), as shown below:
CUE MIX - Sent to Headphones 1 and 2
CUE MIX Selected SPDIF from Unit 2Unit 1 Analogue Ins Master fader Set to 0