User Manual

FRONT AND REAR CONNECTIVITY

Analogue channel inputs (inputs 1-2)

• 2 Mic XLR combo (channels 1-2) on front panel

• 2 Line ¼” TRS (channels 3-4) on rear panel

• Automatic switching between mic / line (channels 1-2)

• Switching between line / instrument Inputs (channels 1-2) via Safﬁre MixControl application

• Switching between +16dBu (low) and -10dBV (high) gain on inputs 3-4 via Safﬁre MixControl application

Digital channel inputs (inputs 5-6) 44.1 - 96kHz

• Stereo S/PDIF input on RCA

Analogue audio outputs (outputs 1-4)

• 4 ¼” TRS jacks

• Output level control (analogue) for outputs 1 and 2

• Stereo headphones mix 1 on ¼” TRS (also routed to outputs 3 & 4) with independent volume control

Digital channel outputs (outputs 5-6) 44.1 - 96kHz

• Stereo S/PDIF output on RCA

Other I/O

• 1 6-pin FireWire S400 sockets

• 2 standard 5-pin DIN MIDI connectors: in and out

• DC power input connector (for use with supplied universal input power supply)

Front Panel Indicators

• 2 2 segment input meters, sig (-18) and O/L (0dBFS)

• “LKD” locked indicator

• “FW” host connected indicator

• “Power” indicator

• Instrument input source selection LED for channels 1 and 2

• Phantom power (48V) switch and LED for inputs 1 and 2

Weight and dimensions

• Dimensions: approx. 21.5 x 4.5 x 22cm (W x H x D)

• Weight: 1.5kg

Troubleshooting

For all troubleshooting queries, please visit the Focusrite Answerbase where there are articles covering numerous troubleshooting

examples. www.focusrite.com/answerbase.

Focusrite and Safﬁre are registered trade marks of Focusrite Audio Engineering Limited. 2010 © Focusrite Audio Engineering