User Manual

5
Box Contents
• Red 1 500 Series module
• 2 of #4-40 hex-head fixing screws
• 3/32” A/F hex key (for fixing screws)
• 1.5 mm hex key (for gain adjustment knob)
• This User Guide
A word about Power
The Red 1 500 Series is supplied with DC power (±16 V and +48 V) by the rack into which it is plugged. The rack’s own
Power Supply Unit (PSU) may be fitted with a power on/off switch. This should be used to apply power to the Red 1 500
Series module (and any other modules in the rack).
Most 500 Series rack power supplies should have sufficient current capability for the rack to be fully-loaded with Red 1
500 Series modules, if wished. However please check the specifications of your chosen 500 Series rack and the current
requirements of Red 1 500 Series at the end of this manual to ensure compatibility. If there is any doubt, please consult
the documentation supplied with the rack.
Note that the Red 1 has no internal fuses.