User Manual

23
Input Routing
Because the number of channels available reduces when operating at higher sample rates, Input
Routing allows the channel order to be re-arranged so that all input signals required can be accessed.
Use each drop-down list in the table to move input channels in pairs. For example, in the image
below, ADAT inputs 5-6 are being sent to DAW channels 1–2. This means that when selecting inputs
1–2 on a track in a DAW, ADAT inputs 5-6 on the Red 16Line will be recorded.
Each DAW input channel pair can be allocated independently.
Sample Rate – The default routing can be modified independently for each of the three sample rates.
Restore Defaults – Returns the routing to the standard layout defined in the routing tables.
Undo – Cancels change made to the last input selection.
Allocated Signals
(Drop-down List)
Allocated Signals
(Drop-down List)