User Manual

6
About this User Guide
This User Guide applies to both the RedNet 5 and RedNet HD32R HD Bridge interfaces. It provides
information about installing each unit and how either can be connected into your system.
All references relating to the RedNet 5 are also applicable to the RedNet HD32R. In any instances
where names or values differ, the screening or value for the HD32R unit will be appended in square
brackets, eg., “Power [PSU A]”.
A RedNet System User Guide is also available from the RedNet product pages of the Focusrite
website. The Guide provides a detailed explanation of the RedNet system concept, that will help you
achieve a thorough understanding of its capabilities. We recommend that all users, including those
already experienced in digital audio networking, take the time to read through the System User
Guide so that they are fully aware of all the possibilities that RedNet and its software have to offer.
Should either User Guide not provide the information you need, be sure to consult:
www.focusrite.com/rednet, which contains a comprehensive collection of common technical support
queries.
Box Contents
• RedNet 5 [HD32R] unit
• 1 [2] x IEC AC mains cables
• 2 x IEC mains cable retaining clips (See instructions on page 12)
• 2m Cat 6 Ethernet cable
• Safety information cut sheet
• RedNet Getting Started Guide
• Product registration card, provides links to:
RedNet Control
RedNet PCIe drivers (included with RedNet Control download)
Audinate Dante Controller (installed with RedNet Control)
Dante Virtual Soundcard (DVS) Token and download instructions
HD32R
Any information that is relevant to only one device will be separated within a border like this.
RedNet 5 only
HD32R only