User Manual

22
The Dante Controller window has five tabs; Routing, Device Info, Clock Status, Network
Status
and Events. The Routing tab is where custom audio routings can be set up.
The routing page is arranged as a matrix, with audio inputs listed horizontally (‘Dante Transmitters’)
and audio outputs listed vertically (‘Dante Receivers’). The ‘+’ symbol against each RedNet device
may be clicked to expand the full set of inputs or outputs; Note that in the case of an input-only
interface (e.g., RedNet 4), no outputs are listed. Clicking the ‘+’ symbol against the horizontal/vertical
titles
Dante Transmitters and Dante Receivers simultaneously expands all audio inputs and
outputs respectively; clicking the ‘-’ symbol collapses them. In addition to the RedNet devices on the
network, all 128 inputs and 128 outputs available through the RedNet PCIe/ PCIeR card are listed.