User Manual

8
MINIMUM SYSTEM REQUIREMENTS
In general terms, computers running the following operating systems will allow a RedNet system to
deliver satisfactory performance (but see important note below):
Mac
Apple Mac with OS X 10.8 (Mountain Lion) or later. Please note that RedNet is not supported by Mac
PPC.
Min. 2 GB RAM
Dual core Intel Processor (Quad core recommended)
PC
PC running Windows 7, Windows 8 or Windows 10 (32- or 64-bit). Please note that RedNet is not
supported by Windows Vista.
Min. 2 GB RAM
Dual Core processor (Quad core recommended)
IMPORTANT: Focusrite have evaluated a number of specific models of computer for use with RedNet
systems, and recommend the use of one of these if highest system performance is essential (i.e.,
lowest latency at maximum channel count). Users should check www.focusrite.com/rednet for the
latest information regarding specifications of suitable computers.
NETWORK REQUIREMENTS
The Audinate Dante
TM
protocol on which RedNet is based uses standard Ethernet technology for the
network. Although RedNet traffic can be mixed with other network data, we recommend that for
maximum performance the Ethernet network used for RedNet audio should be self-contained and
not used for other IT purposes.
The network topology employed will be dictated by user requirements and building layout.
RedNet is compatible with both Cat 6 and Cat 5e cabling, though Cat 6 STP is preferred. EtherCON
or standard RJ45 connectors with metal screens should be used, with the cable screen bonded to
the connector screen.
Gbit Switch requirements
The switches used in a RedNet network should be of the ‘managed’ type, and designed for use in
1000 Mbps (Gigabit) systems. Un-managed switches may prevent correct RedNet network
configuration. A switch with an internal PSU (i.e., requiring direct connection to AC mains) is
also recommended; the external “plug-top” PSUs supplied with cheaper units may be prone to
interference which could generate audible artefacts in the audio.