User's Manual

6
Top Panel . . .
5 Headphone Level Pot
Controls the volume level sent to the stereo headphone jack on the rear panel.
6 Headphone Mute Switch
Latching switch mutes the audio going to the headphone jack.
7 Output Level Encoder
Controls the volume level sent to the selected monitors. Please refer to Appendix 2 on page 22 for
additional information regarding the system volume control setting.
Also used to adjust preset level values, gain settings and screen brightness.
8 Monitor Mute Switch
Latching switch mutes the audio going to the monitor outputs.
9 Monitor Dim Switch
Dims the output channels by a predefined amount.
The default setting is 20dB. To enter a new value:
• Press-and-hold the Dim switch until Screen 2 displays the
current value, then rotate the Output Level Encoder
10 Preset Switch
Allows the monitor output level to be set to one of two predefined values.
When Preset is active the switch changes to red and the Output Level Encoder is disconnected
preventing the monitor level from being changed unintentionally.
The Mute and Dim switches still function normally whilst Preset is active.
Continued...
5
6
7
8 9
10