User Guide www.focusrite.
TABLE OF CONTENTS OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OVERVIEW Introduction Thank you for purchasing this Second Generation Scarlett 2i2, one of the family of Focusrite professional audio interfaces incorporating high quality Focusrite analogue pre-amplifiers. You now have a simple and compact solution for routing high quality audio to and from your computer and you will also be able to download some exciting new software plug-ins once you’ve registered the product.
Box Contents Along with your Scarlett 2i2 you should find: • Bundle code* for accessing the following on-line resources: - 2i2 USB Drivers for Windows - Focusrite Red 2 & 3 Plug-in Suite - Softube Time and Tone bundle - Pro Tools | First - Ableton Live Lite - LoopMasters sample library - Novation Bass station - Multi-language User Guides • USB cable • Getting Started Guide and Important Safety Information* * information printed on the inside of the gift box System requirements
GETTING STARTED IMPORTANT: WINDOWS USERS - PLEASE ENSURE THAT YOU RUN THE INSTALLER BEFORE CONNECTING THE SCARLETT 2i2 TO YOUR COMPUTER. THE SECOND GENERATION SCARLETT 2i2 IS CLASS COMPLIANT FOR MACS, THEREFORE DRIVER INSTALLATION IS NOT NECESSARY. Software Installation All software required by the Scarlett 2i2 - and several powerful and useful extras - is available for download from the Focusrite website www.focusrite.com/register. You will find a .
Mac OS only: Your OS should automatically switch the computer’s default audio inputs & outputs to the Scarlett 2i2. To verify this, go to System Preferences > Sound, and ensure that the input and output are set to Scarlett 2i2. For more detailed setup options on a Mac, open Applications > Utilities > Audio MIDI Setup. Windows only: Your OS should automatically switch the computer’s default audio inputs & outputs to the Scarlett 2i2.
Connecting your Scarlett 2i2 IMPORTANT - WINDOWS USERS: Before you connect the Scarlett 2i2 to your computer, please complete the software installation according to the instructions on page 5. This will ensure that the hardware uses the correct drivers, and will prevent unexpected behaviour. The Scarlett 2i2 has a single USB 2.0 port (on the rear panel). Once the software installation . (if necessary) is complete, simply connect the Scarlett 2i2 to your computer using the USB cable provided.
Once the Scarlett 2i2 is set as the preferred Audio Device* in your DAW, Inputs 1 & 2 and Outputs 1 & 2 will appear in your DAW’s Audio I/O preferences. Depending on your DAW, you may need to enable certain inputs or outputs before use. The two examples below show Inputs 1 & 2 and Outputs 1 & 2 enabled in the Ableton Lite Audio Preferences. *Typical name. Terminology may differ slightly between DAWs.
Examples of Usage The Scarlett 2i2 is an excellent choice for several different recording and monitoring applications. Some typical configurations are shown below. Connecting a microphone or instrument This setup illustrates the most typical configuration for recording with DAW software on your Mac or PC. In this case, you might record guitar through Input 1 and vocals through Input 2 into your DAW, while monitoring the playback from the DAW via headphones (or speakers).
The front panel input sockets are “Combo” type, which accept either an XLR male connector (you will probably have one on the end of your microphone cable) or a ¼” (6.35 mm) jack plug. If you are using a capacitor (or “condenser”) microphone, you will need to turn on the 48 V phantom power. Phantom power should NOT be on when other types of microphone – e.g., dynamic or ribbon - are in use.
Connecting Scarlett 2i2 to loudspeakers The ¼” jack outputs on the rear panel can be used to connect monitoring speakers. Self-powered monitors (e.g., typical computer speakers) incorporate internal amplifiers with a volume control, and may be connected directly. Larger, passive loudspeakers will require a separate stereo amplifier; in this case, the outputs should be connected to the amplifier’s inputs.
The line outputs are 3-pole (TRS) ¼” (6.35 mm) jack sockets, and are electronically balanced. Typical consumer (hi-fi) amplifiers and small powered monitors will have unbalanced inputs, either on phono (RCA) sockets, or via a 3.5 mm 3-pole jack plug intended for direct connection to a computer. In either case, use a suitable connecting cable with jack plugs at one end.
HARDWARE FEATURES Front Panel 3 2 1 4 7 5 6 8 9 The Front Panel includes the input connectors for Mic, Line and Instrument signals, as well as the input gain and monitoring controls. 1. Inputs 1 & 2 – “Combo” type input sockets - connect microphones, instruments (e.g., guitar), or line level signals via XLR or ¼” (6.35 mm) jacks as appropriate. 2. GAIN 1 and GAIN 2 – adjust the input gain for input signals on inputs 1 and 2 respectively.
Back Panel 10 11 12 10. K (Kensington security lock) – secure your Scarlett 2i2 to a suitable structure if desired. Please see www.kensington.com/kensington/us/us/s/1704/kensington-security-slot.aspx for further information on how to use this feature. 11. USB 2.0 port – Type B connector; connect to your computer with cable supplied. 12. LINE OUTPUTS: LEFT and RIGHT – 2 x ¼” (6.35 mm) TRS jack sockets; +10 dBu output level (variable), electronically balanced.
SPECIFICATIONS Performance Specifications Clock Source Supported sample rates Internal 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Microphone Inputs Dynamic Range 106 dB (A-weighted) Frequency Response 20 Hz to 20 kHz ±0.1 dB THD+N <0.002% (minimum gain, -1 dBFS input with . 22 Hz/22 kHz bandpass filter) Noise EIN -128 dB (A-Weighted) Maximum Input Level +4 dBu Gain Range 50 dB Line Inputs Dynamic Range 106 dB (A-weighted) Frequency Response 20 Hz to 20 kHz, ±0.
Headphone Outputs Dynamic Range 107 dB (A-weighted) Maximum Output Level > +10 dBu THD+N <0.002% (minimum gain, -1 dBFS input, 1 kHz, with . 22 Hz/22 kHz bandpass filter) Physical and Electrical Characteristics Analogue Inputs Connectors XLR “Combo” type: Mic/Line/Inst (Inputs 1-2) on front panel Mic/Line switching Automatic Line/Instrument switching 2 x front panel switches Phantom power Shared 48 V phantom power switch for inputs 1 & 2 .
TROUBLESHOOTING For all troubleshooting queries, please visit the Focusrite Answerbase at https://support.focusrite.com/ where you will find articles covering numerous troubleshooting examples. COPYRIGHT AND LEGAL NOTICES Focusrite is a registered trade mark and Scarlett 2i2 is a trade mark of Focusrite Audio Engineering Limited. All other trade marks and trade names are the property of their respective owners. 2016 © Focusrite Audio Engineering Limited. All rights reserved.