Owner's Manual

11
You can now “build” the mixer that will feed the selected Output by clicking on the two ‘+’ tabs. Each
will open a selection box: the HARDWARE INPUTS half of the area lists all the Scarlett’s physical
inputs (see page 13 for details of available hardware inputs for your Scarlett device), while in the
SOFTWARE (DAW) PLAYBACK area, the selection box lists the available DAW tracks. You can repeat
this process as many times as you like, adding channels up to the maximum capacity of your Scarlett
hardware. Note that you may need to resize the window or use the horizontal scroll bar when the
number of channels starts to exceed the window size.
Note that in both boxes, each input is listed twice: individually (mono) and as half of a stereo pair.
Selecting a stereo pair of inputs creates a stereo input channel.
In the example above, we might be doing an overdub: several DAW tracks have already been recorded,
two additional tracks are going to be recorded and we wish to create a stereo foldback mix for one
of the musicians.