Owner's Manual

21
Digital
This Output Preset is a useful starting point when using a separate ADAT-equipped microphone pre-
amplifier such as the Scarlett OctoPre. When used with the Scarlett 18i20 it enables ten digital input
channels, eight sourced from the ADAT input port and two from the S/PDIF input. DAW tracks 1 and
2 are also enabled as a stereo channel. The sum of the inputs is routed to the same pairs of outputs
as with the analogue Presets described previously.
All other Scarlett outputs are sourced directly from the corresponding DAW playback tracks, as per
the Direct Routing table on page 16.
Empty
This may often be the most convenient Output Preset to use as it clears all existing setups to allow
the user to start building their own configuration as required.
On the Scarlett 18i20, Monitor Out 1 and 2 and Line Outs 7 to 10 (paralleled as the headphone outputs)
are set to receive a custom mix; all other outputs are sourced from individual DAW tracks, as with
the other Presets.