Owner's Manual

2 Channel Analogue

This is the Output Preset to use when using the Scarlett as your analogue recording “front end”. The

Preset conﬁgures the Scarlett’s routing with Analogue Inputs 1 and 2 available as HARDWARE INPUTS

and DAW tracks 1 and 2 available as a stereo channel in the SOFTWARE (DAW) PLAYBACK section.

For example, on the Scarlett 18i20, the summed output of these input channels is routed to Monitor

Outputs 1 and 2, and also to Line Outputs 7 and 8, and 9 and 10, as a stereo pair in all cases. On this

model, Headphone Outputs 1 and 2 follow Line Outputs 7/8 and 9/10 respectively, with their own

front panel headphone levels controls. This setup is ideal for recording a guitarist and a vocalist to

a computer drum track, for example, as it enables each to have an individual mix of the drums and

each other.

As more tracks are recorded, simply add additional DAW playback tracks to the mix.

All other Scarlett outputs are sourced directly from the corresponding DAW playback tracks, as per

the Direct Routing table on page 16.