User Manual

8
Double-click “Click Here to Get Started”. This will redirect you to the Focusrite website, where we
recommend that you register your device:
Click on “Let’s get you started”, and you’ll be presented with a form which will be partly prefilled
for you automatically. On submitting the form, options will be presented to either go straight to the
downloads area to get the software for your Scarlett, or to follow a step-by-step setup guide based
on your choices. Once you have installed the Focusrite Control software to setup and configure your
interface, the Scarlett will be switched out of MSD mode so that it no longer appears as a Mass
Storage Device when connected to your computer.
Your OS should automatically switch the computer’s default audio inputs and outputs to be the
Scarlett 4i4. To verify this, right click on the Sound icon on the taskbar and select Sound Settings,
and set the Scarlett as the Input and Output Device.