Owner's Manual

6
MIXING & ROUTING PAGE
Installing Focusrite Control on your computer will place an FC icon on the desktop (Windows)
or in the Applications folder (macOS).
Click the icon to launch Focusrite Control. You should see a screen similar to that below:
NOTE
If instead you get a warning message stating No Hardware Connected, this means that
the computer has been unable to establish communication with the Scarlett hardware.
In this case, please check:
• that the USB cable is correctly plugged in at both ends, and that the cable or
connectors are not damaged in any way,
• that the Scarlett interface is turned on.
The green Sync ‘LED’ at the screen top left should be illuminated; this confirms that the Scarlett
device is locked to a valid clock source. See page 31 for further information.