Owner's Manual

23
Fig. 27
6. Install main housing:
§ Slide main housing onto auger shaft (Fig. 27.1).
§ Install main housing insulation (Fig. 27.2).
§ Use an allen wrench to install 3/16" allen screws (3)
(Fig. 27.3).
3
2
1
3
3
Fig. 28
7. Apply a coat of petrol-gel to the auger shaft.
8. Install gear motor:
§ Install main housing insulation (Fig. 28.1).
§ Slide gear motor onto the auger shaft (Fig. 28.2).
§ Install two 1/2" bolts (Fig. 28.3).
3
3
1
2
Fig. 29
9. Use screwdriver to orient auger shaft to align with
motor shaft keyway (Fig. 29.1).
10. Install key into keyway (Fig. 29.2).
1
2
Fig. 30
11. Install spacer, ensure that key is captured in slot
(Fig.30.1)
1