Owner's Manual

Horizon 1000R/N Ice Machines 7

Operation

Cleaning and preventive maintenance (all models)

Note: Do not use bleach to sanitize or clean the ice machine.

Preventive maintenance

Periodic cleaning of Follett’s ice machine system is required to ensure peak performance and delivery of clean,

sanitary ice. The recommended cleaning procedures that follow should be performed at least as frequently as

recommended, and more often if environmental conditions dictate.

Cleaning of the ice machine system, in most cases, should be performed by your facility’s maintenance staff or a

Follett authorized service agent. Regardless of who performs the cleaning, it is the operator’s responsibility to see

that this cleaning is performed according to the schedule below. Service problems resulting from lack of preventive

maintenance will not be covered under the Follett warranty.

Weekly exterior care

The exterior may be cleaned with a stainless cleaner such as 3M Stainless Steel Cleaner & Polish or equivalent.

Semi-annual evaporator cleaning (every 6 months)

WARNING

• Wear rubber gloves and safety goggles (and/or face shield) when handling ice machine cleaner or sanitizer.

CAUTION

• Use only Follett approved SafeCLEAN™ Cleaner (P/N 0132001) and NU-CALGON IMS-II SANITIZER.

• Do not mix Cleaner and Sanitizer solutions together.

• DO NOT USE BLEACH.

• It is a violation of Federal law to use these solutions in a manner inconsistent with their labeling.

• Read and understand all labels printed on packaging before use.

Note: Complete procedure for cleaning an sanitizing MUST be followed. Ice must be collected for

10 minutes before putting ice machine back into service.

Fig. 1

1. To clean – Remove cover. Press the CLEAN button. The

machine will drain. Wait for the LO WATER light to come

on (Fig. 1).

Note: For Ice Manager diverter valve application, refer

to manual 00175273 for ice machine and diverter valve

cleaning process.

LO WATER