Quick Start Manual

self-contained BIN • RIDE Technology

Connect louvered docking assembly to ice

machine.

Internal connections

Air-cooled ice machines – follow steps 7.1 through 7.4.

➊

➋

• Slide ice machine into louvered docking

assembly

➊

• Insert ice transport tube all the way into

coupling and tighten nut  rmly

➋

Ice transport tube

7. 1

➊

➋

➊

➋

• Insert potable water line into valve

➊

• Push drain line over hose barb on

back of evaporator mount

➋

Potable water line

7. 2

• Position plate into opening and secure

with supplied screw

Power cord

7. 4

➊

• Remove twist tie

• Carefully pass plug thru opening and plug

into wall outlet

Power cord

7. 3

CAUTION

• Plug must be accessible after  nal installation.

• H_E1400A/W 230/50/1 requires a 20A circuit (4.00 mm

wire)