Quick Start Manual

6 Bypass Internal Filtration/Eliminate Water Dispense

3. Remove (1) screw and top of control board enclosure (Fig. 9). Fig. 9

4. Locate the DIP switches on the dispenser's control board (Fig. 10).

Use a  ne-pointed object to move the “Ice/Water” DIP switch (DIP

switch #2) to the OFF position.

Ice & water

Internal filter supplied or to display "Fresh Filtered"

30 minute delay

Six-month PM disabled

OFF ON

Not used (OFF position)

Ice only

No internal filter

Not used (OFF position)

15 minute delay

Not used (OFF position)

Six-month PM enabled

12345678

5. Replace control board enclosure.

Fig. 10