Manualshelf

Owners Manual

ManualsBrandsFollett ManualsCommercial Equipment12HI425A-S0-DP 17" Symphony Plus Series Air-Cooled Condenser Wall Mount Ice and Water Dispenser with 425 lbs. Daily Ice Production, 12 lbs. Storage Capacity, Chewblet Ice and Agion Silver-Based Antimicrobial Protection in Stainless Steel
12345678910
Fig. 9 – Wall mount, utility location
FRONT VIEW
WALL MOUNT
BRACKET
3.70" (9.4 cm)
POTABLE WATER SUPPLY
3/8 COPPER TUBE
7.88" (20.0 cm)
DRAIN
3/4 COPPER TUBE
11.75" (29.9 cm)
POWER CORD EXIT
1.41" (3.6 cm)
0.92" (23 mm)
1.72" (4.4 cm)
WALL
CUTOUT
water and
drain tubing
(7.7 m)
MAX.
3.00"
WALL
SIDE VIEW UTILITIES EXITING WALL
User information
How the dispenser works
Follett’s 12 series automatic-load ice and water dispensers are equipped with Follett’s 425 lb (193 kg)/day ice
machine. In the continuous icemaking process, water freezes to the inside wall of the evaporator. A rotating
stainless steel auger carries the ice to the top of the evaporator where it is compressed and extruded through an
outlet port. The ice is then pushed through a tube to the storage hopper. When the hopper is full, a bin thermostat
opens and shuts the ice machine off. When the dispense mechanism is activated, a dispense motor is turned on,
causing the wheel to turn. This moves ice to the dispense chute where it drops by gravity into the container held
below the chute.
How SensorSAFE infrared dispensing works
Follett’s SensorSAFE infrared dispensing maximizes sanitation and minimizes the possibility of cross-contamination
by eliminating physical contact between the cup or container and dispenser. Sensors in the panel use reected
infrared light to detect the presence of the container and send a signal to a control board which then activates the
appropriate components for ice or water dispensing.
The SensorSAFE infrared dispensing package includes a cleaning switch under the left side of the front cover
which temporarily shuts off dispensing to allow cleaning of the panel and lenses. If the switch is not turned back on
after cleaning, the dispenser automatically resets after two minutes for normal operation.
SensorSAFE infrared dispensing also includes a time limit safety feature which automatically stops ice dispensing
after one minute of continuous dispensing. Dispensing can be resumed by moving the container away from the
dispenser and returning it to the activation zone.
10 12CI425A, 12HI425A