Spec Sheet

Slope front bins
9135-201912 | © Follett LLC
Specification
Maximum bin capacity see model table below
W1 Width see model table below
D1 Depth at bottom see model table below
D2 Depth at door 31.50" (80.0 cm)
D3 Depth with door fully extended 41.50" (105.4 cm)
H1 Height (adjustable) see model table below
H2 Bin sill height see model table below
Required door access see model table below
L1 Drain 1.00" FPT, center of bin bottom
Ice compatibility all ice types
Shipping weight see model table below
NOTE: For indoor use only
SHORT FORM SPECIFICATION:
Ice storage bin to be Follett® model _________. Bin to
hold approximately ______ lb (kg) of ice. Construction to be welded steel shell and frame.
Exterior finish to be stainless steel front and sides with galvanized steel back and bottom.
Bininterior to have non-corroding polyethylene-lined walls and stainless steel bottom. Bin
insulation to be CARB compliant non-HFC foam, bonded to shell and polyethylene-lined walls
for added structural strength. Bin top to be stainless steel and to be custom-cut for specific
ice machine(s) to be used. Lift door to have stainless steel exterior and ABS interior, bonded
together with CARB compliant non-HFC foam for extra rigidity and strength. Bin to have
conveniently low door sill height to allow easy access to ice in the bottom of the bin. Door
opening to be completely sealed with fully replaceable gasketing. Bin to have 6.00"(15.24 cm)
legs, adjustable to 6.75" (17.14 cm). Bin drain to be 1.00" FPT rigid PVC. NSF listed.
Dimensional drawing
Model
Maximum bin
capacity
lb (kg)
Cubic volume
cu ft (m)
Width - W1
in (cm)
Depth - D1
in (cm)
Height - H1
in (cm)
Door Sill
Height - H2
in (cm)
Required door
access
in (cm)
Approximate
ship weight
lb (kg)
300-22
2
300 (136) 9.6 (0.27) 22.00 (55.9) 29.50 (74.9) 40.00 (101.6) 26.00 (66.0) 23.00 (58.4) 128 (58)
425-30 430 (195) 13.8 (0.39) 30.00 (76.2) 29.50 (74.9) 40.00 (101.6) 26.00 (66.0) 31.00 (78.7) 144 (66)
650-44 660 (299) 20.8 (0.59) 44.00 (111.8) 29.50 (74.9) 40.00 (101.6) 26.00 (66.0) 32.00 (81.2) 178 (81)
950-48 950 (431) 30.1 (0.85) 48.00 (121.9) 28.25 (71.8) 50.00 (127.0) 36.00 (91.4) 32.00 (81.2) 207 (94)
1025-52 1030 (467) 32.6 (0.92) 52.00 (132.1) 28.25 (71.8) 50.00 (127.0) 36.00 (91.4) 32.00 (81.2) 217 (98 )
Notes:
 Follett recommends installation of a floor drain with grate with all ice storage bins.
2
Model 300-22 only for use with Follett
®
Maestro Plus
™
425 and Horizon Elite
™
710 series ice machines.
L1
C
L
C
L
D3
H1
D1
H2
W1
D2
HORIZON ELITE, MAESTRO PLUS and SMARTCART are trademarks of Follett LLC.
FOLLETT is a registered trademark of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary
depending on country of origin.
Follett Europe Polska Sp. z o.o.
Mokry Dwór 26C 83-021 Wiślina, Poland
[phone] | Fax: [phone]
folletteurope.com
801 Church Lane | Easton, PA 18040, USA
1.610.252.7301 | Fax: [phone] | follettice.com