Owners Manual

7CI100A/7FS100A, 15CI100A/15FS100A 27
User Interface Display Identication
Operation Display
Condition
Procedure
Normal
operation
Cleaning Mode Press and release maintenance/clean
switch to clean the user interface
without dispensing ice or water (see
Maintenance/Cleaning Mode on page
12).
Drip tray full Empty drip tray.
Six-month
periodic
maintenance
required
Follow Maintenance Mode procedure
(below) and also see NSF-approved
Cleaning and Sanitizing Procedure on
page 14.
Maintenance
Mode
Enter Maintenance Mode by pressing
maintenance/clean switch until
displays. Complete the cleaning and
sanitizing procedure shown on page
14 and change the lter, if so
equipped. Exit Maintenance Mode by
pressing and holding maintenance/clean
switch until
no longer displays.
Service -
8000 hr
bushing check
Call Follett Technical Service Group at
(877) 612-5086 or +1 (610) 252-7301.
The ashing wrench indicates that the
8000 hr bushing check is required.
PM